Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Get 2616 to ring on a 500 phone

Status
Not open for further replies.
dant63

dant63

MIS
Mar 28, 2012
5
US
Guys,
I need to have an ext on a 2616 visible on a 500.
I have a median.

Any ideas?

thanks

D
 
Sort by date Sort by votes
Wrong forum for one and two you cannot do what your asking. You can only assign a single line/500 port one ext. You can do it the other way around, add the 500 ext. to the 2616 but not what your asking.

Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

It wire techs
  • Locked
  • Question
Ringdown phone
Replies
4
Views
842
curlycord
curlycord
jonsjacks
  • Locked
  • Question
algo 3004 door phone 1
Replies
2
Views
947
jonsjacks
jonsjacks
icmpflood
  • Locked
  • Question
Copper to Fiber switch on Nortel ICS /appr&ring on/in-calls neither appearing or ringing on hand 2
Replies
6
Views
824
Tele-tech
Tele-tech
P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
curlycord
  • Locked
  • Question
BST Door Phone - Norstar Compatibility
Replies
3
Views
637
Nortel4Ever
Nortel4Ever

Part and Inventory Search

Sponsor

Back
Top