Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

gathering client info from a Catalyst 2900XL

Status
Not open for further replies.
cosmo2003

cosmo2003

MIS
Joined
Mar 9, 2003
Messages
1
Location
US
I am new at the whole cisco thing. I am working on a project at work and want to be able to poll the cisco 2900 for the connected clients IP address and/or Mac address. Is this possible, if so how?

I already have the 2900 all setup, IP assigned, SNMP enabled, etc...

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

jobsp90
  • Locked
  • Question Question
I have a issue in my office hospital network regarding using IPPBX software.
Replies
2
Views
511
DavetheChef
DavetheChef
DTGMI
  • Locked
  • Question Question
Moving from Juniper SRX-240 to Cisco ??
Replies
0
Views
344
DTGMI
DTGMI
bfordz
  • Locked
  • Question Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
352
bfordz
bfordz
CPM86
  • Locked
  • Question Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
541
CPM86
CPM86
B
  • Locked
  • Question Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
389
badwolf1686
B

Part and Inventory Search

Sponsor

Back
Top