G3r to Nortel BCM connectivity

[1Sam1]

Help needed...
I am trying to establish connectivity between AVAYA G3r and Nortel BCM. Connectivity is done via PRI. I am able to place calls from G3r to BCM, however unable to make calls from BCM to G3r. I am able to maka station to station calls at BCM end, no problem with that. Problem is getting the call on that trunk from BCM to G3r. I am not very familiar with BCM setups yet, I set it up per instructions on Admin Manual. If any one of you out there have conected G3r to BCM, I sure would like to get some help from you. Thanks

1Sam1

 

[dan94]

I am very interested in how you set this up, and if you got it working properly. I am getting ready to install the same thing. If you don't mind sharing your configuration on the pri link I would shure like to compare