avaya@trans> cp g350_sw_29_24_4.bin /tftpboot
copy tftp SW_imageA g350_sw_29_24_4.bin 127.1.1.31
trans-mg-004(tech)# copy tftp SW_imageA g350_sw_29_24_4.bin 127.1.1.31
Confirmation - do you want to continue (Y/N)? Y
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show download software status 10' command
trans-mg-004(tech)# show download software status 10
Module #10
===========
Module : 10
Source file : g350_sw_29_24_4.bin
Destination file : G350-A
Host : 127.1.1.31
Running state : Erasing Flash ...
Failure display : (null)
Last warning : No-warning
Bytes Downloaded : 0
trans-mg-004(tech)# show download software status 10
Module #10
===========
Module : 10
Source file : g350_sw_29_24_4.bin
Destination file : G350-A
Host : 127.1.1.31
Running state : Writing ...
Failure display : (null)
Last warning : No-warning
Bytes Downloaded : 5607424
[b][COLOR=#CC0000]trans-mg-004(tech)# show port
Port Name Status Vlan Level Neg Dup. Spd. Type
------ ---------------- --------- ---- ------ ------- ---- ---- ----------------
10/3 NO NAME connected 1 0 disable full 100M Avaya Inc., G350
Media Gateway, 10/100BaseTx Port[/color]
[/b]trans-mg-004(tech)# show download software status 10
Module #10
===========
Module : 10
Source file : g350_sw_29_24_4.bin
Destination file : G350-A
Host : 127.1.1.31
Running state : Idle
Failure display : (null)
Last warning : Lifetime validation test failed.
Bytes Downloaded : 12561547
trans-mg-004(tech)# set boot bank bank a
Error: Parameter 1 (<value>) value (bank) is not a unique completion
set boot bank -- Set boot bank A or B.
Usage: set boot bank <bank-A | bank-B>
trans-mg-004(tech)# set boot bank bank-a
Boot bank set to bank-A