G3 V6 1

[Montero84]

Hello,

Can't I use the TN2224 digital 24 ports circuit packs on a G3 V6? what are the requirements to be able to use this circuit packs? Thanks!

 

[Montero84]

It's my understanding that the TN2224 circuit packs are supported in V4 and higher. any one have some documentation/information regarding this?

 

[4merAvaya]

Definity R5 ECS (1996): 24 port (2-wire) digital packs

Kevin

 

[Montero84]

Hey Kevin,

Thanks for the reply. Do you know if there's a specific vintage that should work for the R5 and/or R6? would a TN2224CP HW04 /FW002 works? thanks again!

 

[4merAvaya]

I haven't tried it, but as long as the base circuit pack is the same (TN2224), I would thing any suffix would work.

Kevin

 

[Montero84]

Kevin, Thanks again. One more question... Do you know what command should I use to check if I have a ECS ? I tried with "display system cust", "display capacity" and "list conf soft" but I can't see if it's a Enterprise. I am able to see the information regarding: Software package "Enterprise" in CM 5 when I run a "display system cust" but no the Definity. Thanks again!