Mitel 3300ICP = 192.168.175.5
Number range = 2***
Trixbox = 192.168.174.200
Number range = 1**
Subnets are both local connected using a router.
On the Mitel 3300ICP:
-Network Element Assigment:
Create a network element for the Mitel and one for the Asterisk box
Asterisk=
Type = Other
FQDN or IP adress = 192.168.174.200
SIP Peer = selected
external FQDN or IP = 192.168.174.200
SIP registrar FQDN or IP = 192.168.174.200
- SIP IP Port Assignment:
SIP UDP = 5060
SIP TCP = 5060
SIP TLS = 5061
- DID Ranges for CPN Substitution:
Index = 10
DID Range = 2000-2999
CPN Substitution = 2XXX
- SIP Peer Profile:
SIP peer profile label = Asterisk
Local Account registration username = 150
Adress type = IP adress : 192.168.175.5
Authentication username = 150
password en confirm password = 150
Authentication = Challenge-based Authentication
Outgoing DID Ranges: select index 10
- Trunk Service Assigment:
Trunk service number = 10
class of service = 10
trunk label = SIP trunk
Dial in Trunks Incoming Digit absorb = 0
- Route Assignment:
Route number = 10
Routing medium = SIP Trunk
Trunk group number = empty
SIP Peer profile = Asterisk
Route Type = PSTN access via DPNSS
- ARS Digits dialed Assignment:
Digits Dialed = 1
Numbers to follow = 2
Termination Type = route
Termination number = 10
Make shure to enable Public Network Access via DPNSS in the SIP trunk COS.
On the Trixbox in FreePBX:
- Create a SIP trunk:
Outgoing Trunk name = Mitel
PEER Details:
allow=ulaw
auth=md5
context=from-pstn
host=192.168.175.5
insecure=very
nat=no
secret=abc123
type=peer
username=150
- Create a SIP Extension:
Display name = Mitel 3300ICP
Device options:
secret = abc123
canreinvite = no
context = from-internal
host = dynamic
type = peer
nat = no
port = 5060
dial = SIP/150
- Create an outbound route:
Route name = Mitel3300ICP
Dial patterns = 2XXX
Trunk Sequence = 0 SIP/Mitel
- Create inbound routes for your SIP extensions:
for example SIP extention 100:
- DID number = 100
Set destination = core: extension 100