Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Frames...locking them?

Status
Not open for further replies.

bluecat11

MIS
Joined
Nov 10, 2002
Messages
6
Location
US
Hi. I'm building a site for a law firm and have actually built two templates; one for 800 x 600 browsers and one for 1024 x 768. I'm going to add a redirector script so people will be automatically sent to the right page soon...

Anyway, the question. I want to make it so that if people adjust their browser size, the frames won't re-position vertically. In other words, if you make your browser smaller (by adjusting the corners for example), the frames become misalligned. Any advice is appreciated.

Here's the pages: (1024 x 768)
(800 x 600)
Thanks.
 
If anyone's wanting to know this too, I just made the graphic straight on the left so if the browser sneaks up a bit, it will still be on. :)
 
Oops. Here's the new link so you'll know what I mean. The first thread will show you the first way I did it, which didn't work. This link (below) has a redirect script; so depending on your browser resolution, it will redirect you to 800 x 600 or 1024 x 768.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top