Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FPD2.6 132 column display

Status
Not open for further replies.
cricket

cricket

Technical User
Joined
Jul 5, 2000
Messages
361
Location
IE
Is there a utility or method of switching VGA/SVGA screens to 132 column wide, even if it means switching in MS-DOS before launching FPD2.6 and leaving a permanent 132 column display until reset. This would be so useful for Browse.
 
Sort by date Sort by votes
If you are talking about running DOS, with a Video card and Monitor that supports a VESA mode with 132 columns, then yes - I'm sure there are still utilities around. (I used one MANY years ago.) If you are asking about this capability running in "DOS" under Windows, then probably not.

Rick
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bharons
  • Locked
  • Question Question
handle column count Grid on VFP
2
Replies
33
Views
2K
bharons
bharons
SitesMasstec
  • Locked
  • Question Question
How to order a column of data in a Grid
Replies
3
Views
986
EinTerraner
EinTerraner
bharons
  • Locked
  • Question Question
Find the location of the column in the VFP table
2
Replies
25
Views
3K
ggreen61
ggreen61
bharons
  • Locked
  • Question Question
The conversion of the varchar value '1111224080294' overflowed an int column
Replies
12
Views
3K
Chris Miller
Chris Miller
Dronner
  • Locked
  • Question Question
How to display photos from Visual Foxpro 6?
2
Replies
23
Views
2K
sedenter
sedenter

Part and Inventory Search

Sponsor

Back
Top