Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fourth PRI on MICS XC 7.1 1

Status
Not open for further replies.
gtechjoe

gtechjoe

Vendor
Oct 9, 2007
108
US
Is is all possible to add fourth PRI to MICS XC 7.1. If so does anyone have any idea how to accomplish adding fourth PRI?
 
Sort by date Sort by votes
This is only hearsay, but I've heard it is possible although Nortel never supported it. The non-core digital trunk cards must be in slot 1 of a 12x0 module connected to ports 7 & 8 of the first 6-port expansion card. The non-core Digital trunk cards must be the NT7B74AAAA type. Program as usual. I think some on this forum have made this work.

Brian Cox
Oregon Phone
 
Upvote 0 Downvote
What would you set the clocking of the cards at if you added a 4th?
 
Upvote 0 Downvote
Thanks exsmogger the fourth PRI installed and worked exactly as you explained.
pccal: the clock card setting stays the same for all four PRI's
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
Michael OConnor
  • Locked
  • Question
DR4 to XC 7.1 too big of a jump?
Replies
5
Views
401
Michael OConnor
Michael OConnor
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
638
curlycord
curlycord
telllman
  • Locked
  • Question
External Paging on Norstar MICS 12 32
Replies
5
Views
506
telllman
telllman

Part and Inventory Search

Sponsor

Back
Top