Forward after Coverage Path

[pablo111]

Hi all

I have setup a coverage path on station A, which directs the call to station B (and it works OK). But when station B makes call-forward to station C the coverage-path on A stops working. After call-forward activation on B, when you call A, the coverage path to B doesn't work. It seems the forwarded station (B), cannot act as point of coverage (for A).
Is it true.
I have the similar problem, testing another scenario:
station A forwarded to station B and station B has coverage path to station C. When I call A it goes to B but it does'not go farther to C.

Is there any chance to configer such chains of forwards/coverage paths.
I know that I can configure several points in one coverage path but I would like to use features setup on diffrent stations.

Any help appriciated.
Regards

 

[Ronster]

This is how it should work. Calls to station A will only follow the coverage path for station A. If the coverage point on Coverage Path A is busy (Station B) it then looks to the next hop on Coverage Path A, not the coverage path of B.

What is it you are trying to achieve? If you did get a chain setup it would get very messy with calls potentially looping back to the start point and never finding a non-forwarded station!

Maybe you want to setup a circular hunt group?

Ronster
"I always arrive late at the office, but I make up for it by leaving early."

 

[pablo111]

Thanks Ronster

I just wanted to confirm my suppositions.
You are right, it would be to difficult to investigate such chain forwards.

Regards