Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Force user from Signalling Server OAM pty

Status
Not open for further replies.
absinthium

absinthium

IS-IT--Management
Aug 28, 2003
104
AU
Hi all,

Is there a way to force disconnect a user from a terminal session within the SS OAM> shell?

Or can you disable these PTYs?

oam> 21/08/2008 11:22:11 LOG0004 tLogin: User <admin2> has logged into the system.
who
FD DEVICE USER ADDRESS
3 /tyCo/0 nobody
9 /tyCo/1 nobody
35 /pty/pty00.S admin1 172.16.83.15
58 /pty/pty01.S admin1 172.16.83.15
67 /pty/pty02.S admin2 172.16.80.17
oam>
 
Status
Not open for further replies.

Similar threads

Robones
  • Locked
  • Question
Call server ip address suddenly changed
Replies
2
Views
321
Robones
Robones
shaikh007
  • Locked
  • Question
extension ringing but user can hear ring
Replies
1
Views
403
Firebird Scrambler
Firebird Scrambler
John Tel
  • Locked
  • Question
CS1K Signaling Server partition full /dev/hda10 (Not the normal /var issue). Directory not working.
Replies
4
Views
872
John Tel
John Tel
Everest67
  • Locked
  • Question
Active station numbers unknown if actually used on end user side
Replies
1
Views
360
Firebird Scrambler
Firebird Scrambler
jtr4580
  • Locked
  • Question
Paging Trunk from Cloud Based System to a Carehawk School System
Replies
0
Views
411
jtr4580
jtr4580

Part and Inventory Search

Sponsor

Back
Top