firmware

[sia30]

hi i dont know how upgrade my elu34 firmware by command

 

[fcpli]

1) Copy the FW to your flash/hard disk. The latest FW is CAA1580033 R8D (or ELF34 R8D)
2) CNBLI:BPOS=xxxxx,path=zzzzzzz (the path to the FW on the hd/flash including the FW name)
3) Block the board
3) CNBSI:BPOS=xxxxx
4) CNBCI:BPOS=xxxxx
5) Unblock the board

 

[sia30]

thank you so much

 

[sia30]

Share computer files to be copied with the command cnbli flash?

 

[sia30]

What direction do the upgrade file on your computer? Flash mx-one can copy it?

 

[fcpli]

What direction?????

If you have a TSW, use MDDT (if there is a network connected) or FICPI (if RS232 connection). The flash/HD is the one connected to the NIU board.

 

[sia30]

The upgrade file winfiol techniques and f2 do this?

 

[Satellite1900]

you must transfer to the hard disk the firmware through ftp program MDDT (SAM).
After loading the firmware you have to block the card with the command BLDBI, transfer the firmware with the command CNBLI, on positive result, run the commands CNBSI CNBCI.
check with the command CNBIP the new firmware and unlock the card with the command BLDBE

\Satellite1900

 

[sia30]

thank you so much my name is ahmad i live in iran we are very lo info about aastra because they not work in iran