Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FIrmware upgrade on S8300/G430

Status
Not open for further replies.

moose4me

Technical User
May 22, 2002
123
US
Hello all,
Not quite sure if I am doing this correct as it has been several years. I need a refresher on upgrading firm ware on cards residing in a g450 such as mm712, mm711 etc. I have an MM711ap hw31 fw096 that needs a firmware update. What would be the steps that would allow me to do this. I have an S8300D rls 6.3. Any assistance is as always greatly appreciated.
 
copy firmware files to the s8300 /tftpboot folder

207102 Mar 23 2012 mm711h30v96.fdl
212466 Feb 5 2013 mm711h40v98.fdl

md5sum mm711h30v96.fdl
d4008feb1e58b507bcbedd931a65a9eb mm711h30v96.fdl

md5sum mm711h40v98.fdl
b3b8d169268f6b257f49a2166ca8993f mm711h40v98.fdl

from g450 (127.1.1.31 is IP to s8300, "3" is the v3 g450 slot)

G450-001(super)# copy tftp module mm711h30v96.fdl 127.1.1.31 3
Confirmation - do you want to continue (Y/N)? Y

Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show download software status 2' command

G450-001(super)# show download software status 2
Module #2
===========
Module : 2
Source file : mm711v96.fdl
Destination file : MM711
Host : 127.1.1.31
Running state : MM-Download - Image downloading...
Failure display : No Error
Last warning : No-warning
Bytes Downloaded : 19968
G450-001(super)# show download software status 2
Module #2
===========
Module : 2
Source file : mm711v96.fdl
Destination file : MM711
Host : 127.1.1.31
Running state : Idle
Failure display : No Error
Last warning : No-warning
Bytes Downloaded : 66048


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
I know the backdoor address's are changed in CM 6.x. So idk if above post will work.

You can download the FW to the utility server and use that ip Address instead.

G450-001(super)# copy tftp module mm711h30v96.fdl <US ADDRESS> 3
 
Thanks for the replies guys. The upgrade was postponed but was finally rescheduled for this past Friday. I was able to use Avaya Tier 3's instructions with good results, thanks AT3.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top