Firmware up-grade always after re-boot

[haironfire]

Since we up-graded IP500 to 4.2.4, everytime we reboot, the 5410 and 5420 V2 phones download firmware.
Any ideas?

 

[tlpeter]

There is a batchfile called turn_off
You can probably find it at C:\Program Files\Avaya\IP Office\Manager

Start it and try to see if it solved

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[Westi]

ALLOW_5410_UPGRADES
check if you have that in the NoUser under the source numbers and if so take it out

Joe W.

FHandw., ACS

If you can't be good, be good at it!

 

[TomMills]

weird, we have this with the odd phone, not the whole system, with ours it seems to be the port, as i can put a phone that says it needs an upgrade on another port and it comes up straight away. not found a fix yet, have just been letting the phones upgrade. ours is on 4.2.4 too

 

[haironfire]

Thanks guys but nothing yet. When I get a chance will swap ports and let you know.