Guest_imported
New member
- Jan 1, 1970
- 0
Does anyone know where I can get the latest or any version firmware for a SynOptics/Bay 28115 switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Firmware Image for 28115
- Thread starter Guest_imported
- Start date
- Status
jimbopalmer
Programmer
the 28115 has a ROM image in it, you can boot from it, (LOCAL) or you can get a new image and put it on an TFTP server and TFTPBoot from it. (REMOTE)
Looking on Nortels site, the latest seems to be 2.1.1.3 it is freely available without a contract. I love everyone til they prove otherwise, sadly some prove otherwise SO quickly
Looking on Nortels site, the latest seems to be 2.1.1.3 it is freely available without a contract. I love everyone til they prove otherwise, sadly some prove otherwise SO quickly
- Thread starter
- #3
Guest_imported
New member
- Jan 1, 1970
- 0
Thanks! I found it this time. I guess I was looking at the wrong parts of their web page. Apparently Entire Site search isn't the entire site.
jimbopalmer
Programmer
Should be the manual
is the release notes
ftp://ftp-support.baynetworks.com/pub/swcode/28000/28k/v2.1.1.3/28k2113.img
is the software The one thing you can't give for your heart's desire is your heart. - Lois McMaster Bujold
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question