File Synchronization between Primary and LSP

[akissa]

Hello All,

I get an FSY alarm everytime I try to save translation to LSP. (primary is S8300, LSPs are S8300). Below you can see what I get in the File synchronization status. DO you have any ideas?



File Synchronization Status for LSP servers
Summary
Status: Completed (Failure, rc=11)
Start time: Thu Oct 19 15:00:29 2006
End time: Thu Oct 19 15:00:29 2006
Fileset: trans_full
Bytes sent: 0
Total targets: 2
Targets completed: 2
Targets succeeded: 0
Targets failed: 2
Targets in progress: 0
Targets remaining: 0

Details
Server name IP address xln Timestamp Status
----------- ---------- ------------- ------
S8300_Limassol 192.168.5.201 Failure
S8300_Paphos 192.168.7.201 Failure

 

[petran]

Can you ping the LSPs from the Main Server ? Has this ever worked ? Are FTP ports open on all servers' firewall ? Is time difference between Main server and LSPs less than 15 min ?

Petran.

 

[akissa]

I can ping them. There is ONLY 1 minute difference in time. FTP ports are open

 

[petran]

Are they all running the same software & have the same patch? Has this ever worked even once ? Are the S8300 configured correctly (main server ip address in the LSP form of the web interface ?)...

Petran.

 

[akissa]

They are running exactly the same software. They are configured correctly in the LSP form. Actually they are in service (see below) but the cannot get save translation stamp on them.



LOCAL SURVIVABLE PROCESSOR
Number Name IP Address Service Translations
State? Updated
1 S8300_Limassol 192.168.5 .201 in-service/idle
2 S8300_Paphos 192.168.7 .201 in-service/idle