Feature Questions

[TBarrnes]

I have a few questions that are unrelated to each other

1. How to you program an analog phone to use a visual ringer and turn off the audible ringer?
2. How do you transfer a call on an analog phone?
3. How do you program an analog phone to do call pick up and what buttons do you press on the set to do the actual pickup?
4. How do I park a call on a phone (analog or digital) and pick it up on another phone?
I REALIZE I'M ASKING A LOT OF QUESTIONS. THANKS IN ADVANCE
Travis

 

[johnpoole]

bad news, you'll need to print the spree code and the ffc codes in the switch to answer those questions. almost all features are not only user assigned but they are not all avaible on every set.. ie. is pua gpua is not in class, you can't use pickup. ass far as the ringer on an analog, if the set does not have a switch (some are on the bottom) you'll have to remove the red ringer lead in the phone. you can't program a set to not ring.. the ringer voltage is also used to light a visual device..

john poole
bellsouth business
columbia,sc

 

[StanleySteamer]

These questions are all answered in the Features and Services Book.

1. You would have to purchase the visual ringer separatly and turn off the ringer in the set or disconnect it.

2. Hookswitch flash, dial the other number, hang up. The set must have CLS XFA for this to work.

3. You need to assign the sets to a pickup group or RNPG.
Then CLS PUA.
To use pickup on analog set user dials the SPRE code + 3. The SPRE is printed in LD 21 (TYPE FTR).

4. Call park operation on a digital set depends whether you are using a system call park DN range.
It also depends whether you have a call park key.

From the Features and Services book

To park a call with the Park key:
1 Press Park twice.
If there is a System Park extension, the call is parked on it. Otherwise, it is parked on your extension.
To park a call on an extension other than the System Park extension, follow these steps:
1 Press Park.
2 Enter the extension number.
3 Press Park again.
To park a call using SPRE codes, follow these steps:
1 Press Transfer or Conference.
2 Dial SPRE 71.
You can dial an extension number to park the call, or you can use the System Park extension, chosen automatically. It shows on your telephone’s display, if equipped.
3 Press Transfer or Conference again.
To retrieve a parked call, follow these steps:
1 Select a free extension.
2 Dial SPRE 72.
3 Dial the extension where the call is parked.

 

[TBarrnes]

Thank you for all that info. I appreciate you taking the time to respond.