Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FAX not receiving - need 48 volts?
- Thread starter abacks
- Start date
AvayaTier3
Technical User
pull the jumper off the circuit pack going to the fax and measure it at the cross connect field. Compare it to a different station connected to a different fax.
If you still have 33v, move it to a different board with -48v. Sounds like you have a bad board.
If you connect the station on a different board with -48v and connect to the fax and it drops to 33v, you may have an issue with the fax.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
If you still have 33v, move it to a different board with -48v. Sounds like you have a bad board.
If you connect the station on a different board with -48v and connect to the fax and it drops to 33v, you may have an issue with the fax.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
- Status
Similar threads
- Locked
- Question