Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Factory Default Nec DT700

Status
Not open for further replies.
Alex1978

Alex1978

Technical User
Joined
Feb 11, 2007
Messages
39
Location
IT
Hi,

I have a Nec DT700 Phone...
and I must configure my phone...
After starting...
Configuration...OK

Then it ask
user: ADMIN
but password: 6633222 don't work (maybe someone has changed it)

Is there a way to make a Factory Reset of phone?

Thanks
 
Sort by date Sort by votes
If you cannot get into the phone (ADMIN + 6633222) then you cannot get to the factory default option.
 
Upvote 0 Downvote
And then how can I configure it?
Is there a reset procedure at the phone start-up?
 
Upvote 0 Downvote
Unfortunately, no. If the password was changed, you need to know it to log in. NEC can probably get into it, but I do not know that procedure.
Maybe someone else in the forum can assist with that. Otherwise you would need to have your dealer send the phone in to NEC to get defaulted.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Looking for NEC DT700 SIP FIRMWARE
Replies
9
Views
1K
wanchat
W
R
  • Question Question
DT700 standard SIP itlisips.tgz
Replies
5
Views
163
Rafi415
R
J
  • Locked
  • Question Question
NEC DT700 ITL-3200-2P SIP
Replies
3
Views
683
Umitto6
U
Jackcmann
  • Locked
  • Question Question
DT700 Original Firmware
Replies
0
Views
227
Jackcmann
Jackcmann
T
  • Locked
  • Question Question
DT700 firmware standard sip
Replies
2
Views
436
mahirgul
mahirgul

Part and Inventory Search

Sponsor

Back
Top