Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extreme BD 8810

Status
Not open for further replies.

chieftan

MIS
Dec 18, 2002
292
GB
Hi,

We are utilising 2 x Extreme BD8810's for our core switching. We are running VRRP across these switches, so 1 is master and 1 is slave. These switches are utilising type A blades.

We purchased recently a replacement 8810 but the blades (which are apparently compatible) are type C Blades.

Upon re-connecting the new switch to the old switch we had a VRRP issue of both switches becoming the Master (Not good). This caused connectivity issues (obviously).

Does anyone know if there are issues with software compatibility between the A version blades and C version blades?

The images and Boot roms are the same on both switches.

Cheers
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top