extn no is not going out on o/g calls

[01071981]

I have config E1 pri with more than 500 DDI nos.I/c calls to all extn are working ok.but when any of the extn is dialing out only main no is going out to the caller.its not adding extn no .

 

[mdsamir110]

hii every 1,,

i am facing a typical problem linking Md110 to BP250 through CAS / PRI .

the main problem is whenever we dialout from BP250 that particular channel get blocked.

i have changed the parameters , cards and slots as well on both the MD110 and BP250 but the problem still persists.

please help.

 

[whosrdaddy]

mdsamir110,

don't hijack other people's threads. Start a new thread instead.

01071981,

please post printouts of these commands:

RODAP:ROU=X;
ROCAP:ROU=X; (where X is the number of your E1 route)
RONDP:ROU=ALL;
NUTRP;
KSCAPIR=Y; (Y = extension you are calling from)

/Daddy



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!