Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
External calls to users on embedded voicemail. 3
- Thread starter abrtech
- Start date
So internal calls can reach the voicemail without issue but external calls get a message from the Central office that they can't connect. What kind of trunks do you have copper or PRI? I am thinking a telco issue.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
- Thread starter
- #4
Hi thanks for your help.
I talked to the contact and she said the message the external callers get is, This is not a valid extension? I tried calling into the DID from cell and land line 30 times and all calls hit voicemail. Could it be the DID is not being presented properly? I have asked the contact to note some of the callers cell/land line numbers to see if its just certain numbers calling having the issue.
I talked to the contact and she said the message the external callers get is, This is not a valid extension? I tried calling into the DID from cell and land line 30 times and all calls hit voicemail. Could it be the DID is not being presented properly? I have asked the contact to note some of the callers cell/land line numbers to see if its just certain numbers calling having the issue.
-
1
- #6
Think you are on the right track with trying to determine where the calls are coming from. Is the embedded vm capturing the CLI? I have seen some other posts that setting the voicemail to capture CLI can cause issues.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
-
1
- #7
I once had an issue at release 4 where the integration failed when called from specific outside numbers but not others.
Upgrade fixed it.
What actual release are you running?
**********************************************
What's most important is that you realise ... There is no spoon.
Upgrade fixed it.
What actual release are you running?
**********************************************
What's most important is that you realise ... There is no spoon.
Greetings Gents,
I work with Gordmon and I would like to add a bit of information.
The site is running Release 9.0.3.29... it's a Mitel 3300 LX system, using the embedded voicemail.
This site has 20 ports, all which work - there are no dead ports, Gordmon had the customer check by calling each port individually.
Customer has a PRI.
According to the customer: a caller will call a DID, the caller hears ringing then gets transferred to the mailbox, caller hears the greeting of the correct mailbox, then a message saying that the mailbox is invalid...
Gordmon cannot duplicate nor have I been able to duplicate the issue.
The system has been rebooted since the issue was first noticed. They are on a monthly scheduled reboot.
Customer said the issue returned and she was emailed stating that the caller couldn't leave a message. That was around 12:30pm that day - after checking the All Logs, there is nothing in the logs... No indication of any issue around that time, so there is no record of issue.
Any thought?
Thank you.
I work with Gordmon and I would like to add a bit of information.
The site is running Release 9.0.3.29... it's a Mitel 3300 LX system, using the embedded voicemail.
This site has 20 ports, all which work - there are no dead ports, Gordmon had the customer check by calling each port individually.
Customer has a PRI.
According to the customer: a caller will call a DID, the caller hears ringing then gets transferred to the mailbox, caller hears the greeting of the correct mailbox, then a message saying that the mailbox is invalid...
Gordmon cannot duplicate nor have I been able to duplicate the issue.
The system has been rebooted since the issue was first noticed. They are on a monthly scheduled reboot.
Customer said the issue returned and she was emailed stating that the caller couldn't leave a message. That was around 12:30pm that day - after checking the All Logs, there is nothing in the logs... No indication of any issue around that time, so there is no record of issue.
Any thought?
Thank you.
-
1
- #10
Hey Ynotphone, Say hi to Gord for me, I didn't know his handle before now.
You might want to look into the VM log for the call data. File = diag.dat and is a plain text file.
You can find it using filezilla
**********************************************
What's most important is that you realise ... There is no spoon.
You might want to look into the VM log for the call data. File = diag.dat and is a plain text file.
You can find it using filezilla
**********************************************
What's most important is that you realise ... There is no spoon.
Well, Although the voicemail did exist on systems that old, it was not the Express. The prompts we're completely different back then. The Express version did not get added until the first go round on rel 4 circa 2004ish (I think). My first version was 2.0 is 2002, it's been a long haul.
**********************************************
What's most important is that you realise ... There is no spoon.
**********************************************
What's most important is that you realise ... There is no spoon.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question