Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Event ID 13562

Status
Not open for further replies.

dhanz10

IS-IT--Management
Apr 21, 2004
26
US
This issue has been previously posted.... I just need someone to help me walk this through specifically on copying the right DN path base on the first step of MS knowledge base Q312862, listed below

1. Use one of the following methods to locate the DN path of the NTDS Settings object for the computer that has the missing (null) Server-Reference attribute:
In LDP or ADSIedit, copy the DN path of the NTDS Settings object from the Configuration container in the root domain of the forest to Clipboard.

-or-
From the domain partition of Active Directory, copy the value of the Server-Reference attribute from a healthy domain controller to Clipboard. This domain controller needs to be in the same Active Directory domain and site as the broken computer, otherwise you have to edit the DN path.

ReddLeffty suggested this site below but does not help me with the issue


Any more suggestions will be appreciated. Thanks in advance

*********************************************************
Previous message I posted:

Im getting this message once a day. I tried to follow the steps on Microsoft Knowledge Base Article 312862 and still gives me the error.

I have two domain controller that I used as the root for DFS which replicates with one another, and I also have two file server that has the links for the DFS files. The first file server has the replicated files and the second file server has the original files. The machine that generates this warning is the second file server

Following the Article 312862 on MS knowledge base, I used ADSIedit to copy the DN path of the NTDS Settings. Not sure if I copied the wrong path that is why it is not resolving this issue. Does anyone know what path should I copy ? and which machine should I run this to ?

Thanks in Advance...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top