Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Event ID 10 after SP1 install

Status
Not open for further replies.

linhawaii

Technical User
Apr 30, 2001
60
US
I installed SP1 on my Windows 2003 Standard Edition Server, which also has running on the same machine Exchange 2003. I also installed SP1 for my Exchange also this past weekend.

Everything seems to have been running fine since Saturday at 1:30 pm (when I finished the installs), until yesterday at 3:30 pm. I am now seeing Event ID 10 errors every 15 minutes in the Application Event Viewer.

I have listed the exact events below, but they are way above my ability to troubleshoot.

All I have been sort of able to find out is that the event has something to do with WMI and I may have a memory leak that causes WMI to not be able to report correctly...

Any help (in the best layman terms you can give) is GREATLY appreciated.

Source: WinMgmt Category: NONE Event ID: 10
Event filter with query "SELECT * FROM __InstanceDeletionEvent WITHIN 600 WHERE TargetInstance isa "Win32_PnPEntity"" could not be (re)activated in namespace "//./root/cimv2" because of error 0x8004106c. Events may not be delivered through this filter until the problem is corrected.

Source: WinMgmt Category: NONE Event ID: 10
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance isa "Win32_LogicalMemoryConfiguration" AND TargetInstance.AvailableVirtualMemory > 0" could not be (re)activated in namespace "//./root/cimv2" because of error 0x8004106c. Events may not be delivered through this filter until the problem is corrected.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top