When trying to add new TN into the PABX I get the error message "SCH1870
The number of digital TNs in the system exceeds the number of digital TNs defined in the tape directory." How am I going to solve this? There's plenty of unused TN's in the system
ANALOGUE TELEPHONES 96 LEFT 24 USED 72
CLASS TELEPHONES 0 LEFT 0 USED 0
DIGITAL TELEPHONES 592 LEFT 0 USED 592
DECT USERS 0 LEFT 0 USED 0
IP USERS 4 LEFT 4 USED 0
BASIC IP USERS 0 LEFT 0 USED 0
DECT VISITOR USERS 0 LEFT 0 USED 0
ACD AGENTS 150 LEFT 40 USED 110
All digital telephones are used. And now I have to run a report of all TN's which are not responding and remove these. Before I aqquire new licenses
but if you go to ld 117 and enter inv generate sets, it will take a few minutes but tell you when it finishes. you do not need to stay in the ld or logged in.. after it finishes ld 117 inv prt sets.. that will list the as built and the idu of each station plus the missing phones.. any sets that are not plugged in may be a few "lost" sets that you can out and get the software tn's back
periodically, I go to load 32 and do an LDIS on all my loops. I then print it to a file and any TN that's been disabled for more than 30 days and not reported as a trouble, I de-program.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.