Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error E8602 Failed to read fromdatabase

Status
Not open for further replies.

walnuts

Technical User
Joined
Sep 26, 2002
Messages
73
Location
GB
Getting the below error on every mailbox that arcserve 6.6 is trying to backup....

E8602 Failed to read from database (mailbox name) "exchange system error"

Any ideas anyone on a solution.. ca.com is crap

Cheers
 
May be a few items a corrupt mailbox is possible. You may also want to stop and start the exchange client and try rerunning the job.
 
Walnuts,

do you get this error on all the mailboxes or just a few...???

If it is on all the mailboxes, check the mailbox of the account you are using for Brick level backup.... it should not be hidden.

If it happens on a few mailboxes, check to see if those mailboxes have any corruption..

Cheers
Speshalyst So it Shall be Written!
So it Shall be Done!!
 
speshalyst,

Yeah it's all the mailboxes.... I did check the mailbox and it's wasn't hidden..

Cheers
 
Have you tried not doing brick level to see what that does? Just a thought.......
 
Stacy12,

good idea.... i'll give it a go and see what happens..

Cheers
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top