Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Enabling TLS?
- Thread starter hibroth
- Start date
I think this is the bit I have had to do to use TLS on equinox with a private certificate.
Go to
Login
Go to Settings-->General
Scroll Down to Certificates
Click on Download (PEM-encoded)
Save this file locally.
Rename the file to WebRootCA.pem
Open putty
Connect to iposerveredition on port 22
Login with Administrator.
Type cd .. until at the top directory
Type cd /opt/ipoffice/system and hit enter
Type sudo chmod -R 777 primary and hit enter
Open WinSCP
Connect to iposerveredition on port 22
Login as Administrator
Navigate to opt/ipoffice/system/private
Copy the newly renamed certificate into this directory.
The other setting I do on R11 I believe is just to make the J series use TLS which is done by adding
# J1X9SPECIALS
SET TLSSRVRID 0
to 46xxspecials.txt
| ACSS SME |
Go to
Login
Go to Settings-->General
Scroll Down to Certificates
Click on Download (PEM-encoded)
Save this file locally.
Rename the file to WebRootCA.pem
Open putty
Connect to iposerveredition on port 22
Login with Administrator.
Type cd .. until at the top directory
Type cd /opt/ipoffice/system and hit enter
Type sudo chmod -R 777 primary and hit enter
Open WinSCP
Connect to iposerveredition on port 22
Login as Administrator
Navigate to opt/ipoffice/system/private
Copy the newly renamed certificate into this directory.
The other setting I do on R11 I believe is just to make the J series use TLS which is done by adding
# J1X9SPECIALS
SET TLSSRVRID 0
to 46xxspecials.txt
| ACSS SME |
- Status
Similar threads
- Locked
- Question
- Locked
- Question