abntelecom
Vendor
I'm getting this error when trying to perform a data dump.
Has anyone seen and resolved this error before?
Has anyone seen and resolved this error before?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EDD0016
- Thread starter abntelecom
- Start date
- Status
EDD0016
Incorrect data. Dump is inhibited to prevent writing bad data to
storage medium.
Action: "Investigate and clear any SYSxxx messages which may appear
concurrently with this message, then attempt to datadump onto a second
copy of the Storage medium. If EDD016
is printed again, enter the EDD CLR command, then reload from the new
copy to check that data is now valid. If this is done after a reload,
the only further cause would be CED203.
On dual-memory machines, the indicated memory pack should be retested
and reenabled (data will be copied from the other memory). If this
fails again (or for single memory
machines), use EDD CLR to dump data to a second copy of the storage
medium, then reload and check any SYS or INI errors for possible data
corruption."
Severity: Critical
Incorrect data. Dump is inhibited to prevent writing bad data to
storage medium.
Action: "Investigate and clear any SYSxxx messages which may appear
concurrently with this message, then attempt to datadump onto a second
copy of the Storage medium. If EDD016
is printed again, enter the EDD CLR command, then reload from the new
copy to check that data is now valid. If this is done after a reload,
the only further cause would be CED203.
On dual-memory machines, the indicated memory pack should be retested
and reenabled (data will be copied from the other memory). If this
fails again (or for single memory
machines), use EDD CLR to dump data to a second copy of the storage
medium, then reload and check any SYS or INI errors for possible data
corruption."
Severity: Critical
- Status