Dynamic Monitoring in HiPath 4000

[luvarne]

Is there an application program for HiPath 4000 that dynamically monitors the status of the trunk lines, subscribers, DECT base stations, access points, and IPDA in one?

 

[sbcsu]

Not that I am aware of, you can do them individually.
Errors can be sent to different devices if required.
Every morning you could check Trunk Lines with pre-setup access codes, or just by DIS-BUEND:,B;
DECT Base station errors will show up in HISTA or you can check the CAT Tool for erros.

 

[kevin906]

In Assistant there is an application called Dynamic Traffic Monitoring which takes the output from DIS-BUEND:,B; and turns it into a graphical output. It is only available for trunking. No monitoring for phones or internal traffic points.