Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dual PRI Licenses
- Thread starter gknight1
- Start date
From The Knowledgebase:
"On each card, 8 channels per interface are enabled by default. This means that the single PRI has 8 channels enabled, while the dual PRI has 8 channels enabled on each of the two circuits. Further channels may be enabled by the purchase of additional licenses in 2-channel or 8-channel increments.
"On each card, 8 channels per interface are enabled by default. This means that the single PRI has 8 channels enabled, while the dual PRI has 8 channels enabled on each of the two circuits. Further channels may be enabled by the purchase of additional licenses in 2-channel or 8-channel increments.
Nortel4Ever
Vendor
How is it decided which PRI circuit the additional licenses are registered against? If you buy a single 2 channel license does one PRI circuit how have 10 channels and the other still has 8? What if one PRI circuit needs to be 23 channels and the other only 8?
amriddle01
Programmer
You set the amount of channels per line in programming....
- Status
Similar threads
- Locked
- Question
