eddiebullman
Programmer
DT 900S is there a way to factory reset a DT900 ITK-32LCGS-1P if you don't have the password as 6633222 comes up with invalid password
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DT900 reset
- Thread starter eddiebullman
- Start date
- Status
george3283
Technical User
Might try this, but depends on the model.
- Unplug Ethernet: Unplug the Ethernet cable from the phone.
- Press Microphone: Press and hold the microphone button while powering on the phone by plugging the Ethernet cable back in.
- Release Button: Release the microphone button after a few seconds.
- Thread starter
- #3
eddiebullman
Programmer
Do you mean the mute key? model is in original post
- Thread starter
- #5
eddiebullman
Programmer
Thanks for the help did not work phone keeps connecting to a disabled cloud account
OzzieGeorge
Programmer
Ok so there may be the answer to the situation! Is the phone using standard sip and is the password for the standard sip firmware different to the nec firmware?
- Status