DS1 card maintenance mode

[AndyAPAC]

Is there any way of setting a DS1 card to a "maintenance" mode so that it puts all the channels into a busy state and waits for active calls to clear down and then makes those ports busy as well.

I remember doing it a looong while ago but I'm a bit rusty these days.

All help greatly appreciated.

Cheers,
AndyAPAC

 

[4merAvaya]

Beginning in V9 Avaya introduced a feature called Camp-on Busyout. It allows you to immeniately busyout all idle members of a trunk group and will wait for the active members to go idle before busing them out.

Kevin

 

[AndyAPAC]

Kevin, thanks again. The system is running V11, but I can't find the "camp-on busyout". Is it in the trunk group pages or sig-group pages? I looked in both but couldn't find any sign of it.

Cheers,
Andy

 

[mikeydidit]

It is in the initial commands screen. You will have to have technical permissions to use this feature. If you do the command to run this would be "camp trunk ?" The ? would be either the trunk group or member #.


Mike Jones
LSUHSC