telecom4242
Programmer
I have several Nortel PBXs that use QSIG tie lines to a Cisco 3845 Gateway for network calling. My problem, when I call from a specific Nortel site an opt 81 3.0 to another site via the QSIG tie lines, I found that if a call is from a extension that does not have a CLID setup (name) this call drops after the first ring, however if I put just one letter in the name it works fine. I have done a compare with our other sites and all is setup the same, MSDLs,DCHs,Routes,Trunks and the cisco 3845s. My other sites are able to complete the call with out a name assigned and the extension is displayed. The debug shows mandatory information missing when the call is dropped. I have some two thousand SCR keys that don’t have names assigned so really don’t want to just add the names. Thanks for any help.
