Drives are not being recognized by Solaris 9 1

[md1750]

I have netbackup installed on V480 running Solaris 9.When I execute:/usr/openv/volmgr/bin/sgscan all conf -v
/dev/sg/c0tw2100001086115474l0: Changer: "ATL M2500 3.07"
/dev/sg/c0tw2100001086115474l1: Tape (???): "HP Ultrium 2-SCSI F49Z" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw2100001086115474l2: Tape (???): "HP Ultrium 2-SCSI F49Z" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw216000c0ff87f9e0l0: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw216000c0ff87f9e0l1: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw216000c0ff87f9e0l2: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw216000c0ff87fedcl0: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw216000c0ff87fedcl1: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw216000c0ff87fedcl2: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw266000c0ffe7f9e0l0: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw266000c0ffe7f9e0l1: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw266000c0ffe7f9e0l2: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw266000c0ffe7fedcl0: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw266000c0ffe7fedcl1: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw266000c0ffe7fedcl2: Disk (???): "SUN StorEdge 3510 327R"
/dev/sg/c0tw500000e010a61501l0: Disk (???): "FUJITSU MAP3735F SUN72G 1501"
/dev/sg/c0tw500000e010a61e71l0: Disk (???): "FUJITSU MAP3735F SUN72G 1501"

And my /dev/rmt/*cbn does not have any output.Any pinters is appreciated

 

[huebs]

On my V880 the devices look like this:

root@master:/devices/pci@9,600000/SUNW,qlc@2/fp@0,0>> ls -la *w100000e0022298c1,0*
crw-------   1 root     root     278, 38 Jan 31 22:07 sg@w100000e0022298c1,0:raw
crw-rw-rw-   1 root     sys       33,667 Dec 16 12:12 st@w100000e0022298c1,0:
crw-rw-rw-   1 root     sys       33,731 Oct  8 19:58 st@w100000e0022298c1,0:b
crw-rw-rw-   1 root     sys       33,735 Oct  8 19:58 st@w100000e0022298c1,0:bn
crw-rw-rw-   1 root     sys       33,667 Oct  8 19:58 st@w100000e0022298c1,0:c
crw-rw-rw-   1 root     sys       33,731 Oct  8 19:58 st@w100000e0022298c1,0:cb
crw-------   1 root     sys       33,735 Feb 11 12:55 st@w100000e0022298c1,0:cbn
crw-rw-rw-   1 root     sys       33,671 Oct  8 19:58 st@w100000e0022298c1,0:cn
crw-rw-rw-   1 root     sys       33,659 Oct  8 19:58 st@w100000e0022298c1,0:h
crw-rw-rw-   1 root     sys       33,723 Oct  8 19:58 st@w100000e0022298c1,0:hb
crw-rw-rw-   1 root     sys       33,727 Oct  8 19:58 st@w100000e0022298c1,0:hbn
crw-rw-rw-   1 root     sys       33,663 Oct  8 19:58 st@w100000e0022298c1,0:hn
crw-rw-rw-   1 root     sys       33,643 Oct  8 19:58 st@w100000e0022298c1,0:l
crw-rw-rw-   1 root     sys       33,707 Oct  8 19:58 st@w100000e0022298c1,0:lb
crw-rw-rw-   1 root     sys       33,711 Oct  8 19:58 st@w100000e0022298c1,0:lbn
crw-rw-rw-   1 root     sys       33,647 Oct  8 19:58 st@w100000e0022298c1,0:ln
crw-rw-rw-   1 root     sys       33,651 Oct  8 19:58 st@w100000e0022298c1,0:m
crw-rw-rw-   1 root     sys       33,715 Oct  8 19:58 st@w100000e0022298c1,0:mb
crw-rw-rw-   1 root     sys       33,719 Oct  8 19:58 st@w100000e0022298c1,0:mbn
crw-rw-rw-   1 root     sys       33,655 Oct  8 19:58 st@w100000e0022298c1,0:mn
crw-rw-rw-   1 root     sys       33,671 Oct  8 19:58 st@w100000e0022298c1,0:n
crw-rw-rw-   1 root     sys       33,667 Oct  8 19:58 st@w100000e0022298c1,0:u
crw-rw-rw-   1 root     sys       33,731 Oct  8 19:58 st@w100000e0022298c1,0:ub
crw-rw-rw-   1 root     sys       33,735 Oct  8 19:58 st@w100000e0022298c1,0:ubn
crw-rw-rw-   1 root     sys       33,671 Oct  8 19:58 st@w100000e0022298c1,0:un

Is your st driver loaded?

modinfo | grep -i tape
146 784e4000  12dcc  33   1  st (SCSI tape Driver 1.216)

A patchlist for SUNWsan on Solaris 9 is (in this order):
111847
113039
113046
113049
114476
114477
114478
113040
113041
113042
113043
113044
114878

 

[md1750]

$ modinfo | grep -i tape
40 1382e6e 13144 33 1 st (SCSI tape Driver 1.229)
And all those patches are installed.An update, one of the power supplies is bad and on a reboot the library is stuck at initializing drive 2. Support folks will by on Monday.Thanks for your assistance so far.

 

[md1750]

The drives are up.We are using the FC420 fibre channel bridge and it is not configured.Also with respect to client installation,.rhosts on clients are to populated with the master server name.After that what should I do next?

 

[md1750]

Many thanks to Huebs for your assistance in getting Netbackup working.All you pointers were very helpful.Thanks again.

 

[yahdin]

/opt/openv/volmgr/bin/scan -tape (Netbackup 5.0)
/opt/openv/volmgr/bin/goodies/scan -tape (Netbackup 5.0)