Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Downgrade 8.1 > 8.0

Status
Not open for further replies.

Takayama

Programmer
Joined
Sep 5, 2012
Messages
39
Location
BR
I'm with problems to downgrade the IPO's release from 8.1 to 8.0.

When I try to downgrade it shows a message written "FAILURE".

What can it be ? Is necesesary license Software Upgrade ?
 
It's probably quicker and better in the long run to re-format and re-create the SD card to 8.0, rather than downgrade.

Dan

Live every day as if wild dogs were chasing you!!
Wild dogs....everyday....LIVE!!!
 
Why downgrade?

BAZINGA!

I'm not insane, my mother had me tested!

 
Because the Voicemail Pro stopped to work.

I instaled the Voicemail in 8.0 and 8.1 but it didn't work.
 
A little drastic if your voicemail suddenly stopped working!!

If it did work and now it doesn't then you probably have a PC/Network/routing/firewall type issue.

VM Pro works fine on 8.1.

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
 
unplug and try to ping it, had that today that some (unnamed individual) assigned a printer the same static IP address. VM works then stops then works again depending on the mood.
Very annoying to troubleshoot

Joe W.

FHandw, ACSS (SME), ACIS (SME)



“Quality is never an accident; it is always the result of high intention, sincere effort, intelligent direction and skillful execution; it represents the wise choice of many alternatives.”
 
In the system status is showing "VM Pro/Lite fails to connect to control unit
 
What release is your VMPro running?

BAZINGA!

I'm not insane, my mother had me tested!

 
Administration 8.0 (61)
Voicemail 8.0 (5001)
 
Have you done this before?

Your password may be wrong. Try something else [ponder]

 
I changed the password in Security and in the Voicemail and now it's working normally !

Thanks !!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top