Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dos client
- Thread starter close
- Start date
ARoethenmund
Programmer
Hi
On your WinNT-CD you'll find a directory called Clients.
You should also have a tool in the 'Administrative Tools' called 'Client Administrator' or so.
The problem is, that the Client Administrator is not aware of new NICs. So you'll have to configure System.ini and Protocol.ini for your self.
If you have more specific informations, I can give you samples.
Andreas
On your WinNT-CD you'll find a directory called Clients.
You should also have a tool in the 'Administrative Tools' called 'Client Administrator' or so.
The problem is, that the Client Administrator is not aware of new NICs. So you'll have to configure System.ini and Protocol.ini for your self.
If you have more specific informations, I can give you samples.
Andreas
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question