Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Door Phone
- Thread starter BCMIPTECH
- Start date
Deweyhumbolt
Technical User
At least 10.
"Adversity is Opportunity
"Adversity is Opportunity
- Thread starter
- #5
Deweyhumbolt
Technical User
Programming is done through UM or EM depending on s/w level. No ftr code to program.
"Adversity is Opportunity
"Adversity is Opportunity
Yes, If you are using the door opener to deactivate a magnet by digit press, sometimes it is good to have the locksmith or door installer there as a vendor meet. Sometimes they can give you advice on the wiring of the magnet in the lock, and tie it all together if there are any strange problems. The manuals that come with both parts are pretty good as well. Not much to them.
Kevin
Kevin
RikRodgers
Vendor
Consider using a Hunt Group for the ringdown. In Michigan, full time receptionists are a rare breed, and setting up a HG divvys out the responsiblility of responding to customers.
Deweyhumbolt
Technical User
LKev is right. If you want to guarantee victory you need to meet with door-strike guy.
"Adversity is Opportunity
"Adversity is Opportunity
- Thread starter
- #10
- Status
Similar threads
