GeneralDzur
Technical User
The title says it all. Is it based on IOS image? Because for some reason our 2611's don't seem to know what SSH is.
- stephan
- stephan
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Do the Cisco 26xx-series routers support SSH?
- Thread starter GeneralDzur
- Start date
- Status
Yes, but you will need a Crypto Image. Looking on the Feature Navigator on CCO at 12.3 images for 2610-2613 you will need the 'IP/FW/IDS PLUS IPSEC 3DES BASIC' and even then it is only SSH V1 support. No other images are listed that support SSH for the 2610-2613 platform.
If you are running any other protocols than IP (such as IPX) you will be a bit screwed as there are no images for this platform that have both SSH and non-IP protocols.
Andy
Andy
If you are running any other protocols than IP (such as IPX) you will be a bit screwed as there are no images for this platform that have both SSH and non-IP protocols.
Andy
Andy
- Thread starter
- #3
GeneralDzur
Technical User
We're just using IPv4; pretty basic setup really. We have a bunch of 2611's at remote sites that we want to remotely monitor, and Telnet is really insecure.
I have to pay Cisco for that image, correct?
- stephan
I have to pay Cisco for that image, correct?
- stephan
( You may be able to negotiate some discount or trade-in with your supplier though?- Thread starter
- #5
GeneralDzur
Technical User
$1700 for an IMAGE!?!?
Wow...I had no idea. Hmmm...maybe we'll setup a remote Console server at each site w/ port-forwarding.
Thanks Andy
- stephan
- Status
Similar threads
- Locked
- Question