Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Display Statement -revised
- Thread starter D2BEA
- Start date
Hi,
This depends also on what system you are working. But, if you use the display statement, you can use more than one of course, until the screen is filled.
The display statement is not combined with the assign clause.
In your working-storage, you can also define a complete screen. There are examples on this site. You can display the screen in one statement.
The screen definition in your working-storage can also be written to a file. Line by line probably.
I hope this is helpful.
Regards,
Crox
This depends also on what system you are working. But, if you use the display statement, you can use more than one of course, until the screen is filled.
The display statement is not combined with the assign clause.
In your working-storage, you can also define a complete screen. There are examples on this site. You can display the screen in one statement.
The screen definition in your working-storage can also be written to a file. Line by line probably.
I hope this is helpful.
Regards,
Crox
- Status
Similar threads
- Locked
- Question
