Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Display codes on MGC

Status
Not open for further replies.
runlun

runlun

IS-IT--Management
Joined
Dec 12, 2006
Messages
106
Location
NO
Hi

Wonder if someone is familiar with the display codes of the media gateway controller.

Suddenly we lost connection with one of our MGC cards, the display is telling E0003. This was unexpected, cause we are working in our lab, and nothing of the stuff here have bin touched during the night
 
Sort by date Sort by votes
MGC Faceplate error codes are in the Software Input/Output System Messages NTP NN43001-712

E003 = Link is down to the call server



911Guru
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lexer
  • Locked
  • Question Question
Tandem trunking on E1 Card
Replies
9
Views
1K
lexer
lexer
Trason
  • Locked
  • Question Question
e911 on rls 7 where to start
Replies
2
Views
782
bignose21
bignose21
finest
  • Locked
  • Question Question
Nortel Ringer/Buzzer while you are on a call
Replies
4
Views
813
finest
finest
phonebits
  • Locked
  • Question Question
M2000 Series MCA Data Add-On Modules - No Sign of Life/Power
Replies
2
Views
541
phonebits
phonebits
MoJHK
  • Locked
  • Question Question
Nortel 2250 2/4 line display mode
Replies
1
Views
429
Firebird Scrambler
Firebird Scrambler

Part and Inventory Search

Sponsor

Back
Top