Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Disconnected after pause when dialing

Status
Not open for further replies.
portmercphone

portmercphone

Vendor
Joined
Mar 10, 2006
Messages
12
Location
US
How can I increase the time allowed before the phone disconnects when dialing. Example, a user begins to dial a number but takes a 3 second pause before completing the number. The user gets "Disconnect" displayed
 
Sort by date Sort by votes
In the system config, go to the telephony tab. Select the telephony tab and go to Dial Delay Time (ms). It is default for the U.S. at 4000ms that = 4 seconds. You can increase by 1000 to gain more seconds if you need them.

Dizzy
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

shafqat1981
  • Locked
  • Question Question
Voice Pause
Replies
0
Views
291
shafqat1981
shafqat1981
Richard_Harrow
  • Locked
  • Question Question
Avaya J139 phone showing "dialing" continuously when dialing to SIP trunk.
Replies
2
Views
618
IamaSherpa
IamaSherpa
Kevin Merritt
  • Locked
  • Question Question
Dialing out to show CLI
Replies
11
Views
1K
ACSscott
ACSscott
TIgerV
  • Question Question
911 dialing help- IP office 500 v2 ver 11.0
Replies
13
Views
1K
gkittelson
gkittelson
tetratech
  • Locked
  • Question Question
SBCs are Disconnected
Replies
1
Views
310
IPOLackey
IPOLackey

Part and Inventory Search

Sponsor

Back
Top