Disconnect Problem 2

[johnpoole]

pri route going to a mindless nt server, running dictation software

DES  DICTA
TN   016 01
TYPE TIE
CDEN SD
CUST 0
TRK  DTI
PDCA 1
PCML MU
NCOS 1
RTMB 16 1
TGAR 0
SIGL EAM
STRI/STRO WNK WNK
SUPN NO
AST  NO
IAPG 0
CLS  CTD DTN CND ECD WTA LPR APN THFD HKD SPCD
     P10 VNL
TKID
FCAR NO
AACR NO
DATE 25 JAN 2010

TYPE: rdb
CUST 0
ROUT 16

TYPE RDB
CUST 00
ROUT 16
DES  DICTA
TKTP TIE
M911P NO
ESN  NO
CNVT NO
SAT  NO
IDEF NET
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP DTI
ISDN NO
DSEL VCE
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 8000116
TARG
CLEN 1
BILN NO
OABS
INST
IDC  NO
DCNO 5 *
NDNO 5
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF  512
     OGF  512
     EOD  13952
     DSI  34944
     NRD  10112
     DDL  70
     ODT  4096
     RGV  640
     GRD  896
     SFB  3

     IENB  5
     TFD  0
     VSS  0
     VGD  6
SST  5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR  NO
VRAT NO
MUS  NO
RACD NO
MANO NO
EQAR NO
FRL  0 0
FRL  1 0
FRL  2 0
FRL  3 0
FRL  4 0
FRL  5 0
FRL  6 0
FRL  7 0
OHQ  NO
OHQT 00
CBQ  NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART  0
SGRP 0
ARDN NO
AACR NO

and one typical station

DES  IMGCTR
TN   036 0 09 12
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN   8048094 0     MARP
     CPND
       NAME Imaging Dial Dictation
       XPLN 27
       DISPLAY_FMT FIRST,LAST
AST  NO
IAPG 0
HUNT
TGAR 6
LDN  NO
NCOS 1
SGRP 0
RNPG 0
XLST
SCI  0
SCPW
CLS  CTD DTN FBD XFA WTA THFD FND HTD ONS
     LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
     CFTD SFD MRD C6D CNID CLBD AUTU
     ICDD CDMD LLCN EHTD MCTD
     GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
     MBXD CPFA CPTA DDGA NAMA MIND
     MCRD
     EXR0 SHL ABDD CFHD DNDY DNO3
     CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
     CDMR MCDD T87D PKCH
PLEV 02
FCAR NO
AACS NO
MLWU_LANG 0
FTR  PHD
DATE  5 JAN 2010

dict stations are typical non did.. from testing i can trad the trunk, it shows a normal call.. if i add the dn to my set.. the lamp goes dark, pick up the line to monitor, no converstation..rls lamp goes out.. trac the analog station, it goes idle.. if it were roh, that would make sense.. this is not an older type dictation station.. it a ntxx analog set.. zero feature.. manual redail and flash..

anyone awake that "will work for stars"


john poole
bellsouth business
columbia,sc

 

[KE407122]

Hi John,
The only differnces I see between yours and mine are:


Yours- SIGL EAM - E&M 2 wire
Mine- SIGL EM4 - E&M 4 wire

Your -RDB
NEDC ETH
FEDC ETH

My RDB
NEDC ORG
FEDC ORG

Org is the default for Tie. ETH for all others.

Mark
Ontario, Canada


KE407122
'Who is this guy named Lo Cel and why does he keep paging me?'

 

[hawks]

john you said PRI but yet in the RDB you have ISDN set as NO? Also on the Trunk itself what happensif you put SUPN to YES.

 

[johnpoole]

your right, this one does not have a d.. so it is a nonpri.. with supn yes i get lockouts on some digital sets as well as the analog..

the start/stop is the only opt (other then loop) that the dict server people support.. i'll change ndec/fdec back to the defaults to see it that helps


john poole
bellsouth business
columbia,sc

 

[johnpoole]

btw

lo cell

is well know in japan, he and his brother in law, bat low are heavy into prank calls and pages

john poole
bellsouth business
columbia,sc

 

[PERRYPJ]

The lamp going dark all means that your end dropped

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[KE407122]

Hi John,

Thanks for the star. That's high praise indeed to receive one from you. I hope it works.

(Where we run into problems occurs when a supervised Trunk is conferenced to a TIE (EXTT TRNX) on an unsupervised conference or transfer. If EXTT and TRNX are left NO and the initiator hangs up, the call is disconnected and if changed to YES, they stay locked up until you DSCH, ENLL the connection.)