Disabling the speakerphones on 8510T STE phones

[ChesterPBX]

Does anyone know how I can disable the speakerphone capabilites for 8510T STE phones en masse for a section of our building that is Secure? They have requested about 50 lines have their speakerphone abilities revoked. 30 of them are Avaya 2410 digital phones, so I was able to manually go into each extension in ASA, and change the speakerphone option from 2-WAY to NONE. However, when looking up the remaining 20 extensions that are STE 8510T phones, there is no speakerphone option that I can disable, at least not any that I can see.

Does anyone have any suggestions for disabling them remotely from within ASA? Or maybe it can only be done on the hardware?

Thanks for any help you can manage.

Brian

 

[AvayaTier3]

How to Enable or Disable the Listen-only Speaker or the Speakerphone
on the 8510T Voice Terminal
The following procedure is used to enable or disable the one-way speaker or the two-way speakerphone
(listen and speak) on the 8510T terminal.
To enable either the listen-only speaker or the speakerphone on an 8510T voice terminal
1. Press Menu .
2. Press Mute .
3. Dial the numbers, ‘‘77’’ (SP).
d The display shows the current setting: ‘‘Enable Speakerphone,’’ or
‘‘Enable One-way Speaker,’’ or ‘‘Disable Both.’’
4. Either dial one of the following:
Dial ‘‘1’’ to enable the speakerphone
Dial ‘‘2’’ to enable the one-way speaker
Dial ‘‘3’’ to disable both (and exit)
or press * to scroll to next value on the display (the possible values are listed under
Step 3).
5. Press # to save your selection (and to exit).
d You hear confirmation tone and exit softkey mode.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]