Directory Assistance 1

[kprintz]

I was asked how difficult it would be to route all 411 and XXX-555-1212 calls to a directory assistance service (one number).

Does anyone have any ideas how this can be accomplished on Nortel's Meridian PBX? We have 11Cs, 61Cs and 81Cs.

The 411 is a piece of cake but the 1XXX-555-1212 has me stumped. I have thought of using FCAS tables but you can only put 15 NPA entries in one table. I also thought of adding (in LD 90)1XXX 5 but then I would also have to add 9 other entries for each NPA to cover 1XXX 0 thru 4 and 1XXX 6 thru 9. Also, this assumes that any other combination of 1XXX 5XX would be treated as a directory assistance call.

Hope someone out there has a quick easy solution.

thanks in advance
Kevin

 

[janaya]

create a phantom 500 port. Remove 411 from your programming and create a 411 500 set. Set the DCFW to 1XXX5551212 and it should go.

If you have plenty of acdns then just program an acdn to ncfw to your number.

John

 

[mluckie1]

Another method is in each NPA under the SDRR LDID 555. You will need to assign a DMI table to manipulate the number to where you want it to go. LDID can be full 7 digits 5551212.
NPA 1XXX
RLI XX
SDRR LDID 555
DMI xx
ITEI NONE

DMI XX
DEL 11
INST 91800XXXXXXX