Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Directives with WinNT and Legato Networker 6.1.4
- Thread starter peppe71
- Start date
rgiovannelli
IS-IT--Management
Hi,
I've the same problem
Asingrot
I've the same problem
Asingrot
Can you elaborate slightly?
If you want to get *only* that directory off the entire machine, specify that directory in place of "All" in the client definition, although I don't think wildcards are acceptable in that field so you'll have to specify each directory you want. There is a limit to the number of lines in this field, I forget the max but I cap mine at 8 lines per client definition. You can include multiple client definitions in the same group within certain criteria. This will also prevent "SYSTEM STATE" and the other "SYSTEM" pieces from being saved.
If you want to get *only* that directory off the entire machine, specify that directory in place of "All" in the client definition, although I don't think wildcards are acceptable in that field so you'll have to specify each directory you want. There is a limit to the number of lines in this field, I forget the max but I cap mine at 8 lines per client definition. You can include multiple client definitions in the same group within certain criteria. This will also prevent "SYSTEM STATE" and the other "SYSTEM" pieces from being saved.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question