Digital boards 1

[twelve]

I have an ISA digi board on a box that used to run unix. Now I am changing this box to a windows 9X machine no big deal right. If I remove the digi board the PC will not post, but if I replace the ISA digi board it will post just fine up to the new HDD. So I believe it to be a jumper on to motherboard itself, It is an old GA-586atm/p, I have searched on

http://www.google.com

for specs. or something that would help me find the right jumper setting.

Any help will be appreciated

twelve

 

[edfair]

Going to be a GA issue. And you will probably find some more issues down the line. Do yourself a favor and get a more industry standard M/B. GA built them special so it would be hard to replace with off the shelf products. Ed Fair
efair@atlnet.com

Any advice I give is my best judgement based on my interpretation of the facts you supply.

Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.

 

[twelve]

thx for the reply edfair, but seeing as my customer doesn't want to or can't aford to buy a new board and cpu. I cant just buy another, but thanks for your comments...twelve