Digit Manipulation/Translation ? Help

[mt6322]

I have a Meridian Option 81c Suc 3 connected via QSIG PRI trunks to a Call Manager 4.0 with Unity voicemail 4.2.

How do I program the Meridian system so you will be able to enter #xxxx from any Meridian phone and send these digits over the tie lines to the call manager. Cisco phones connected to the call manager can express messaged (leave message directly to the mailbox without ringing the phone)by dialing #xxxx (xxxx=any 4 digit extension within call manager/unity).

Any advise will be greatly appreciated.

Thanks in advance.

 

[pbxn]

Sounds like something like building a dmi table specific for that number would do the trick. Instead of sending 7 digits the dmi table could strip the first 3

 

[thattekguy]

Sounds like you want # to dial the CDP for express mail to the unity..I don't know if that can be done.Maybe if you try to do something with the FFC but I doubt it. What is # in the Cisco?