Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Diffrent between port and extension (upgrading issues)
- Thread starter dnaserver
- Start date
whosrdaddy
Vendor
the number of ports is the total maximum number of trunks/extensions you can have on your PBX.
let's say you got 3 ELU29 (board for 16 analog extensions) and 2 ELU28 (board for 16 digital extensions). then the total number of ports would be : 5*16 = 80. in addition, if you have for example an ISDN PRI to your provider you must count 30 ports.
normally the supplier can calculate the total number of ports for you via the CNLIP
EV=YES; command
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
let's say you got 3 ELU29 (board for 16 analog extensions) and 2 ELU28 (board for 16 digital extensions). then the total number of ports would be : 5*16 = 80. in addition, if you have for example an ISDN PRI to your provider you must count 30 ports.
normally the supplier can calculate the total number of ports for you via the CNLIP
EV=YES; command-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question