different subnet configuration...

[tran008]

Hi All,

I have 2 different static ipaddress 10.10.x.x & 172.16.x.x on two different servers. One server have two network cards, and the other have only 1. I want these server to talk to each other. Currently I was able to get the server with 2 network card to see the other server, But not the other around. How can I make the server with 1 network card to see the other server? I'm pretty new a this, and want to learn more about routing. Any suggestion, and redirection to article for further learning is greatly appeciates.

thx....

 

[ChicagoTechNet]

we need more information to help. have you enabled NAT/firewall? posting the result of ipconfig /all here may help.

For more tips or information, check to

http://www.ChicagoTech.net

Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ms-mvps.com

 

[GlenJohnson]

I have 2 different static ipaddress 10.10.x.x & 172.16.x.x on two different servers. One server have two network cards, and the other have only 1. I want these server to talk to each other.

Does the machine with two nics have an ip address of 172.16.x.x and the other nic 10.10.x.x?

Glen A. Johnson
If you're from Northern Illinois/Southern Wisconsin feel free to join the Tek-Tips in Chicago, Illinois Forum.

TTinChicago
Johnson Computers