Dialog 4224 and alarm key

[bb34nne]

Hi to all!

Why alarm key on Dialog 4224 flashes? When I press that key, on LCD says NO ALARM or EXG SERV. If there is no alarms in system, why key blinks? How can I turn that off? In ALEX for EXG SERV says Service ongoing. What that means?



thanks

 

[etompau]

There is a possibilty of connecting a switch to the ALU board, I think, that when activated by a service technician, will indicate for an operator that maintainence is ongoing.

 

[bb34nne]

Can I turn off that alarm indicator somewhere on the phone? Or is there command in Winfiol for turning off that alarm? And what means maintainence is ongoing? Do I have to do dump? There is no maintainence in progress, and key blinks.

 

[rfpup]

aspacarnum=174,parval=1;

 

[bb34nne]

thanks for answer.

I turned off alarm indicationon OPI. But key flashes again. On display says EXG SERV. How to remove that indication? Operator mentioned me it`s pretty annoying to him. What do I have to do?

thanks

 

[bb34nne]

Does someone know how to fix this problem?

 

[nschreuder]

Can you give us a printout of ALEXP;

 

[bb34nne]

Here it is:

<ALEXP;
EXTERNAL ALARM DATA
BPOS: 1-0-62
INPUT TYPE CODE FILE RFILE TEXT
1 SERV SERVICE
3 EXT 771 UNDERVOLTAGE
4 EXT 772 DIST-FUS-OFF
5 EXT 773 DIST-FUS-CTR
6 EXT 774 BAT-FUSE
7 EXT 770 POW-OFF-220
OUTPUT TYPE CODE CLA TEXT
1 EXT 0
2 EXT 1
3 EXT 2
4 EXT 3
5 EXT 4

END

 

[nschreuder]

Try this:

ALEIE:BPOS=1-0-62,ALI=1;